DIY 4x :: Brakes :: Dana 70 Disc Conversion Kit with rotors

This disc conversion kit is a weld on kit that gives you a removable bracket in the end. Designed this way so you have no spacers what so ever and still have a removable bracket. You get everything you see in the photo X 2.

Both the bracket and weld flange are 3/8" thick steel CNC cut for a precise fit! The flange is NOT threaded. So you will never have to deal with damaged threads in the flange. If a bolt or nut are to become damaged just replace and go again! Simple and effective. Hardware consists of 1/2"x 20 grade 8 bolts and nuts. Yes, the nuts are grade 8 nylocs. Loc washers are a high alloy for a long lasting hold.

This kit will include the rotors as well. The rotors are not an off the shelf item. Dana 70 hubs (that we have seen) require a larger center hole. This is the reason for non standard rotors. Rotor availability is no problem we have them on the shelf now! This kit uses the same caliper as our 14BFF kit. A 76-78 Eldorado caliper or a 71-87 GM 3/4 ton 4x4 front caliper.

Select either the Dana 70 kit or Dana 70HD kit. The only diference is the center hole diameter in the weld on flange.

ATTENTION! Your wheel stud splines should not engage the rotor. They should drop through the rotor easily. If the splines engage the rotor the rotor will crack. Wheel stud splines should be a press fit in the hub only.

SKU 00500k

Weight 52.00 lbs

Our price: $182.50